Autoclave Pressure Cooker Type, Epoxy Finish, Electric, 10 litre

You can also buy this product from our Amazon store.

Buy Now

• Epoxy Finish, Electric, 220V. 50Hz. Single Phase
• Approx. Size (Dia. X H): 220mm x 230mm + 38mm Lid (9" x 11") – 1 KW Load
• Approx. Capacity (Ltrs.): 10 Ltrs. With Lid
• All autoclaves are constructed from heavy gauge aluminum. It’s generates steam under pressure and temperature between 120°C to 135°C. 
• Made from seamless Aluminium, top loading autoclaves. Seamless construction ensures bacteria free environment.
• 25-30 minutes sterilizing cycle at 121º c.
• With two stages over pressure protection system incorporating a calibrated continuous bleeding pressure stopcock and pressure release weight valve.
• With heat resistant handles and steam release / control valve.
• Pressure Gauge : Colour coded pressure gauge showing internal chamber conditions during the cycle.
• Sterilization zone in green colour is shown from 15 psi to 20 psi (OR 1.034 bar to 1.378 bar) which is equivalent to temperature of 121°c to 127°c. 
• Dial size : 2.5". Dial show measurement in 2 units (i) kg/cm² (ii) lb/inch². Full scale dial of pressure gauge is 0-30 lb/ inch² or 0-2 kg/ cm². Caution zone in red colour.
• Supplied with inner & outer stand. 
• Suitable for 8"x8" Dressing/Sterilizing Drum - Click Here
• Optional : 1 Hr. Rotary Timer and Dressing/Sterilizing Drum in extra cost
  
  Caution
• DO NOT operate the autoclave without water and avoid using hard water
  
• Close the lid properly and carefully, never attempt to open it during operation with force
• Make sure that the rubber seal is in a good shape and condition
• DO NOT use any alkaline solution in the unit
• DO NOT put any extra weight on the stopcock
• Clean and dry the unit after a day use.